Replacement Filter Info
Sediment/Carbon Prefilter (AFC-WF-SED) – Replace every 6-12 months
Micron Rating: 5 Micron
Change Frequency: 6 to 12 months
Fits In These Systems
3M O401 and 3M O501
Compatible Replaces Part Numbers:
47-55702G2, 47-55702CM and 47-9288G2
Pre- or Postfilter (AFC-WF-300-CB2) – Replace every 6-12 months
Micron Rating: 5 Micron
Change Frequency: 6 to 12 months
Fits In These Systems
3M O401 and 3M O501 , Water Factory SQC4
Compatible Replaces Part Numbers:
47-55711G2 and 47-9299G2
Carbon Block Postfilter (AFC-WF-200-CB1) – Replace every 6-12 months
Micron Rating: 0. 5 Micron
Change Frequency: 6 to 12 months
Fits In These Systems
3M O401 and 3M O501
Compatible Replaces Part Numbers:
3M OP316, 47-55707CM, 47-55707G2, 47-55708G2, 47-55712G2, 47-9295G2, and 47-9296G2
RO Membrane TFC 36 GPD (AFC-WF-M) – Replace every 24 months
Micron Rating: 0. 1 Micron
Change Frequency: 24 months
Fits In These Systems
3M O301, 3M O401, and 3M O501
Compatible Replaces Part Numbers:
66-8706G2 and 66-4706G2
Disclaimer: Do not use this filter with water that is Hot. Do not use the filter with water that is microbiologically unsafe or of unknown quantity. Do not use this filter longer than its intended 12 Month use. Doing so may result in leaks and water damage.
3M® is a registered trademark of 3M Company.
Aqua-Pure® is a registered trademark of 3M Company.
3M®, and Aqua-Pure® are registered trademarks of their respective holders.
American Filter Company and this website are not affiliated with 3M®, and Aqua-Pure®.
This product is not affiliated with or authorized by 3M®, and Aqua-Pure®.
Install Instructions:
- 1. Turn off Water Supply.
- 2. Remove existing filter.
- 3. Install new filter in head and turn till locked.
- 4. Turn on Water Supply.
- 5. Check for leaks.
- 6. Flush system for 3-5 Minutes.
