Performance and Operating Specifications of AFC-DP-ST1-SD:
Removes / Reduces Sediment, Rust and Contaminants down to 5 micron level.
Carbon Blend: White Sediment Block
Flow Rate: 0.5GPM
Micron Rating: 5 Micron
Capacity: 6-Months
Performance and Operating Specifications of AFC-DP-ST2-CB1:
Removes / Reduces Chlorine, Bad Taste, Odor, Sediment, Rust and Contaminants down to 5 micron level.
Carbon Blend: 10 Micron #100 black
Flow Rate: 0.5GPM
Micron Rating: 5 Micron
Capacity: 6-Months
Performance and Operating Specifications of AFC-DP-ST4-CB2:
Removes / Reduces Chlorine, Bad Taste, Odor, Sediment, Rust and Contaminants down to 0.5 micron level.
Carbon Blend: 0.5 Micron Block
Flow Rate: 0.5GPM
Micron Rating: 0.5 Micron
Capacity: 2500 Gallons / 6-12 Months
Performance and Operating Specifications of AFC-DP-ST3-M80:
Removes / Reduces Contaminants down to 0.1 micron level.
Carbon Blend: Membrane
Flow Rate: 0.5GPM
Micron Rating: 0.1 Micron
Capacity: 50 GPD / 18-24 Month Life
Min & Max Operating Pressure: 30 - 125 PSI (207 - 862 KPA)
Min & Max Operating Temperature (for cold water use only): 40-100 °F (4.4-37.8 °C)
Made in USA with US & imported parts.
Compatible Replacement Model Numbers:
Platinum Pure Ultra UPF-8 SED
Pure Plus, Ultra UPF8 Sediment Filter
Platinum Pure Ultra UPF-8 Standard
Ultra UPF8 Standard Filter
Ultra UPF 8 Plus Filter
Dupure Platinum Pure RO Reverse Osmosis Membrane Filter
Compatible Systems:
Dupure Platinum Pure Plus
Disclaimer:Do not use this filter with water that is microbiologically unsafe or of unknown quality. Do not use this filter longer than its intended 6 month use. Doing so may result in leaks and water damage. Product performance is dependent on incoming water conditions.
Dupure® are registered trademarks of Balance Energy LLC. Dupure® is registered trademarks of there respective holders. American Filter Company and this website is not affiliated with Dupure®. This product is not affiliated with or authorized by Dupure®.
Install Instructions:
1. Turn off Water Supply.
2. Remove existing filter.
3. Install new filter in head and turn till locked.
