AFC® #AFC-PB4-1YR-2G-2Y-1PN-1B-6PK, Compatible with PureBlue H2O® PB-TLRO4H50T System

AFC-PB4-1YR-2G-2Y-1PN-1B-6PK
Made-in-USA-with-US-and-imported-materials
Made-in-USA-with-US-and-imported-materials
SKU AFC-PB4-615827494187 Category Tag EAN: 615827494187
1. Choose quantity below
As Low As $21.20 Per Filter!
QTY
Total
Price Per Filter
$179.99
$29.99
$359.99
$29.99
$105.99
$21.20
$24.99
$24.99
$25.99
$25.99
$84.99
$84.99
$37.99
$37.99
Performance and Operating Specifications of AFC-PB4-ST1-SD
Removes / Reduces Sediment, Rust and Contaminants down to 5 micron level
Flow Rate: 0.5 GPM
Micron Rating: 5 Micron
Capacity: 2500 Gallons / 6-Months Life
Performance and Operating Specifications of AFC-PB4-ST2-CB1
Removes / Reduces Chlorine, Bad Taste, Odor, Sediment, Rust and Contaminants down to 5 micron level
Flow Rate: 0.5 GPM
Micron Rating: 5 Micron
Capacity: 2500 Gallons / 6-Months Life
Performance and Operating Specifications of AFC-PB4-ST3-M80
Removes / Reduces Contaminants down to 0.1 micron level
Flow Rate: 0.5 GPM
Micron Rating: 0.1 Micron
Capacity: 50 GPD / 18-24 Months Life
Performance and Operating Specifications of AFC-PB4-ST4-CB2
Removes / Reduces Chlorine, Bad Taste, Odor, Sediment, Rust and Contaminants down to 0.5 micron level
Flow Rate: 0.5 GPM
Micron Rating: 0.5 Micron
Capacity: 2500 Gallons / 6-12 Months Life
Min & Max Operating Pressure: 30 - 125 PSI (207 - 862 KPA)
Min & Max Operating Temperature (for cold water use only): 40-100 degree Fahrenheit (4.4-37.8 degree Celsius)

Made in USA with US & imported parts.

Compatible Filters:
Pre Carbon Block (PB-TLRO4CB2T)
Sediment Block (PB-TLRO4SEDT)
PB-TLRO4CB4T
Reverse Osmosis Membrane (PB-TLROMC50T)
Compatible System:
PB-TLRO4H50T System
Disclaimer: Do not use this filter with water that is Hot. Do not use the filter with water that is microbiologically unsafe or of unknown quantity. DO NOT use this filter longer than its intended 12 Month use. Doing so may result in leaks and water damage.
PureBlue H2O® is a registered trademark of PureBlue H2O,LLC.
H2O® is registered trademarks of its respective holder(s).
American Filter Company and this website is not affiliated with H2O®.
This product is not affiliated with or authorized by H2O®.
Install Instructions:
  • 1. Turn off Water Supply.
  • 2. Remove existing filter.
  • 3. Install new filter in head and turn till locked.
  • 4. Turn on Water Supply.
  • 5. Check for leaks.
  • 6. Flush system for 3-5 Minutes.

What our customers have to say about Us

    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping