AFC® #AFC-WF-200-CB1, Compatible with 3M® Aqua-Pure® 47-9298G2 Water Factory SQC3 System Kit without RO Membrane

AFC® #AFC-WF-200-CB1, Compatible with 3M® Aqua-Pure® 47-9298G2 Water Factory SQC3 System Kit without RO Membrane
Made-in-USA-with-US-and-imported-materials
Made-in-USA-with-US-and-imported-materials
SKU AFC-WF-200-CB1-892097 Categories ,
1. Choose quantity below
As Low As $51.50 Per Set!
QTY
Total
Price Per Set
$55.99
$55.99
$102.99
$51.50
Performance and Operating Specifications of AFC-WF-200-CB1:
Removes / Reduces: Chlorine, Bad Taste, Odorand all Contaminants to 0.5 Micron level
Filter dimensions: 13.00" x 2.50"
Change Frequency: 6 Months - 12 Months
Flow Rate: 1.5 GPM - 2.0 GPM
Micron Rating: 0.5 Micron
Min & Max Operating Pressure: 30 - 125 PSI (207 - 862 KPA)
Min & Max Operating Temperature (for cold water use only): 40-100 °F (4.4-37.8 °C)
Performance and Operating Specifications of AFC-WF-300-CB2:
Removes / Reduces: Chlorine, Bad Taste, Odorand all Contaminants to 0.5 Micron level
Filter dimensions: 13.00" x 2.50"
Change Frequency: 6 Months - 12 Months
Flow Rate: 1.5 GPM - 2.0 GPM
Micron Rating: 5 Micron
Min & Max Operating Pressure: 30 - 125 PSI (207 - 862 KPA)
Min & Max Operating Temperature (for cold water use only): 40-100 °F (4.4-37.8 °C)

Replacement Filter Info

Sediment/Carbon Prefilter (AFC-WF-SED) – Replace every 6-12 months

Micron Rating: 5 Microns and Change Frequency: 6 to 12 months

Fits In These Systems

Water Factory SQC Series and 3MRO301

Compatible Replacement Part Number:

47-9290G2

Carbon Block Postfilter (AFC-WF-CB2) – Replace every 6-12 months

Micron Rating: 0. 5 Microns and Change Frequency: 6 to 12 months

Fits In These Systems

Water Factory SQC Series and 3MRO301

Compatible Replacement Part Number:

47-9298G2, 47-55710G2, 47-55710CM, NP-SQC710, SQC710

RO Membrane TFC 36 GPD (AFC-WF-M) – Replace every 24 months

Micron Rating: 0. 1 Microns and Change Frequency: 24 months

Fits In These Systems

3MRO301, 3MRO401, and 3MRO501

Compatible Replacement Part Number:

3MROM413-20A, 66-8706G2 and 66-4706G2

Disclaimer: Do not use this filter with water that is Hot. Do not use the filter with water that is microbiologically unsafe or of unknown quantity. Do not use this filter longer than its intended 12 Month use. Doing so may result in leaks and water damage.
3M® is a registered trademark of 3M Company.
Aqua-Pure® is a registered trademark of 3M Company.
3M®, and Aqua-Pure® are registered trademarks of their respective holders.
American Filter Company and this website are not affiliated with 3M®, and Aqua-Pure®.
This product is not affiliated with or authorized by 3M®, and Aqua-Pure®.
Install Instructions:
  • 1. Turn off Water Supply.
  • 2. Remove existing filter.
  • 3. Install new filter in head and turn till locked.
  • 4. Turn on Water Supply.
  • 5. Check for leaks.
  • 6. Flush system for 3-5 Minutes.

What our customers have to say about Us

    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping