AFC® #AFC-WF3M-4S-SQC4-FPK, Compatible with 3M® Aqua-Pure® 3MOP411, 3MOP416, 3MOP412, 3MOM413 Part No 3MO501-01 Water Factory SQC4 RO replacement Kit For This System 3MO501

AFC® #AFC-WF3M-4S-SQC4-FPK, Compatible with 3M® Aqua-Pure® 3MOP411, 3MOP416, 3MOP412, 3MOM413 Part No 3MO501-01 Water Factory SQC4 RO replacement Kit For This System 3MO501
Made-in-USA-with-US-and-imported-materials
Made-in-USA-with-US-and-imported-materials
SKU AFC-WF3M-4S-SQC4-FPK-40129 Categories ,
1. Choose quantity below
As Low As $110.99 Per Set!
QTY
Total
Price Per Set
$148.99
$148.99
$261.99
$130.99
$443.99
$110.99
Performance and Operating Specifications of AFC-WF3M-400-M:
Removes / Reduces: Chlorine, Bad Taste, Odorand all Contaminants to 0.5 Micron level
Filter dimensions: 13.00" x 2.50"
Change Frequency: 12 Months - 24 Months
Flow Rate: 1.5 GPM - 2.0 GPM
Micron Rating: 0.1 Micron
Min & Max Operating Pressure: 30 - 125 PSI (207 - 862 KPA)
Min & Max Operating Temperature (for cold water use only): 40-100 °F (4.4-37.8 °C)
Performance and Operating Specifications of AFC-WF3M-100-SED:
Removes / Reduces: Sediment, Rust, and Particulates to 5 Micron level
Filter dimensions: 13.00" x 2.50
Change Frequency: 6 Months - 12 Months
Flow Rate: 1.5 GPM - 2.0 GPM
Micron Rating: 5 Micron
Min & Max Operating Pressure: 30 - 125 PSI (207 - 862 KPA)
Min & Max Operating Temperature (for cold water use only): 40-100 °F (4.4-37.8 °C)
Performance and Operating Specifications of AFC-WF3M-200-CB1:
Removes / Reduces: Chlorine, Bad Taste, Odorand all Contaminants to 0.5 Micron level
Filter dimensions: 13.00" x 2.50"
Change Frequency: 6 Months - 12 Months
Flow Rate: 1.5 GPM - 2.0 GPM
Micron Rating: 0.5 Micron
Min & Max Operating Pressure: 30 - 125 PSI (207 - 862 KPA)
Min & Max Operating Temperature (for cold water use only): 40-100 °F (4.4-37.8 °C)
Performance and Operating Specifications of AFC-WF3M-300-CB2:
Removes / Reduces: Chlorine, Bad Taste, Odorand all Contaminants to 0.5 Micron level
Filter dimensions: 13.00" x 2.50"
Change Frequency: 6 Months - 12 Months
Flow Rate: 1.5 GPM - 2.0 GPM
Micron Rating: 5 Micron
Min & Max Operating Pressure: 30 - 125 PSI (207 - 862 KPA)
Min & Max Operating Temperature (for cold water use only): 40-100 °F (4.4-37.8 °C)

Replacement Filter Info

Sediment/Carbon Prefilter (AFC-WF3M-SED) – Replace every 6-12 months

Micron Rating: 5 Micron
Change Frequency: 6 to 12 months

Fits In These Systems

3MRO401 and 3MRO501

Compatible Replaces Part Numbers:

47-55702G2, 47-55702CM and 47-9288G2

Pre- or Postfilter (AFC-WF3M-300-CB2) – Replace every 6-12 months

Micron Rating: 5 Micron
Change Frequency: 6 to 12 months

Fits In These Systems

3MRO401 and 3MRO501, Water Factory SQC4

Compatible Replaces Part Numbers:

47-55711G2 and 47-9299G2

Carbon Block Postfilter (AFC-WF3M-200-CB1) – Replace every 6-12 months

Micron Rating: 0. 5 Micron
Change Frequency: 6 to 12 months

Fits In These Systems

3MRO401 and 3MRO501

Compatible Replaces Part Numbers:

3MROP316, 47-55707CM, 47-55707G2, 47-55708G2, 47-55712G2, 47-9295G2, and 47-9296G2

RO Membrane TFC 36 GPD (AFC-WF3M-M) – Replace every 24 months

Micron Rating: 0. 1 Micron
Change Frequency: 24 months

Fits In These Systems

3MRO301, 3MRO401, and 3MRO501

Compatible Replaces Part Numbers:

66-8706G2 and 66-4706G2

3M® is a registered trademark of 3M Company.
Aqua-Pure® is a registered trademark of 3M Company.
3M®, and Aqua-Pure® are registered trademarks of their respective holders.
American Filter Company and this website are not affiliated with 3M®, and Aqua-Pure®.
This product is not affiliated with or authorized by 3M®, and Aqua-Pure®.
Install Instructions:
  • 1. Turn off Water Supply.
  • 2. Remove existing filter.
  • 3. Install new filter in head and turn till locked.
  • 4. Turn on Water Supply.
  • 5. Check for leaks.
  • 6. Flush system for 3-5 Minutes.

What our customers have to say about Us

    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping